3D-Coat マニュアル 1 章 SECTION 3 1.3 “E” Panel Brush Settings

1.3  “E” Panel Brush Settings

3D-Coat’s Brushes can be applied with an ordinary mouse, or with the enhanced behavior of a graphic tablet.  Several Brush modes exist in the “E” Panel to help control the application of Brush strokes - as well as an extensive array of spline and polygon based drawing modes. The first 5 icons help you to control the interaction of your Tablet or Mouse.

When not sculpting, these tools work in 2D to define regions and “masks” or “frozen” areas (and relief in the Paint Room).  Some sculpting tools use the shapes you draw as a means to clone, cut, or perform some form of boolean function.

Let’s examine all the functions present in the “E” Panel, starting from left to right, top to bottom:

These first five icons are the standard Brush modes and can be best understood by trying them out, one by one.  A description of each mode appears when you hover your mouse over each icon (as is the case with all 3DC tools and functions - called “hints”).

Apply Brush “Dabs” with Spacing:  This causes the current Brush to especially respond to the “Dabs, Jitter and Spacing” options found in the “Brush Options” Panel.  Experimentation demonstrates this action best.

Draw Connected Lines:  Does just that - and starts a new series of lines after pressing the “Esc” key.

Draw Basic Curve:  Draws a connected series of spline curves which are not editable - the Brush Width and Depth can be controlled, on the fly, with the standard mouse gestures.

Draw Comprehensive Curve:  Draws spline or B-Spline open or closed curved paths which are totally editable with regard to node size and depth - by means of the mouse.  Adjust each node “on the fly” with ordinary mouse gestures - or press “Esc”, hover over a node until you see the node “radius” glow, resize both radius and depth - then Left-Click to confirm. Press “Enter” to apply the Brush and its settings to the model.

Use the Drop-down arrow to access all of the specific functions related to this tool, including saving and loading of curve files.

Stamp tool:  Uses your selected Brush Alpha to add an impression or depression, mask or frozen area, based on this Alpha, at the location you Left-Click the mouse.  LeftClick dragging the mouse resizes and rotates the Stamp.

Movable Stamp:  Works similarly to the ordinary Stamp tool but, when you Left-Drag with the mouse, you can slide your Brush image (Alpha) along the surface of the model.

Square tool:  Use the Scroll Wheel to resize the Brush.  Based on your starting and ending points of the defined Square (or trapezoid), 3DC extrudes or indents a cubic or trapezoidal solid shape based on the Depth setting of the Brush.  (Best to use Orthographic views with this Brush).  Higher Voxel resolutions allow for sharper and cleaner shapes.

Rectangle tool:  Same as the Square tool, but allows for long rectangular and long trapezoidal solid extrusions, indentations and masks.  Higher Voxel resolutions allow for sharper and cleaner shapes.

Polygonal Spline tool:  Based on the 2D polygonal shape that you draw, 3DC extrudes or indents, masks or freezes an area along the surface normal of the object.  Hover Brush Cursor over the first point in the series until you see a small green circle - then hit “Enter” to confirm the shape.
Higher Voxel resolutions allow for sharper and cleaner shapes.

Freeform Drawing Tool:  Use your mouse to draw a freeform shape and hover the Brush Cursor over the first drawn point until the small green circle appears - press “Enter” to confirm the shape.  3DC extrudes or indents, masks or freezes an area along the surface normal of your object based on the Depth setting of the Brush.  Higher Voxel resolutions allow for sharper and cleaner shapes.

Circle Tool:  Draws a perfect circle from the center to the edge of the circle and extrudes or indents, masks or freezes a circular shape along the normal of the object, based on the Depth setting of the Brush.

Ellipse Tool:  Same as the Circle tool, except the shape extruded is based on the Ellipse that is drawn.

Closed Spline Tool:  Extrudes or indents, masks or freezes an area as a closed regular spline or B-spline shape.

An extensive menu of commands exists under the drop-down arrow that accompanies the drawn spline.  Draw regular or B-splines, closing the shape by pressing the “Esc” key.  Right-click over any point to change from smooth interpolation or angular.  You can Load and Save your defined shapes.  Hover the mouse over any command to see the Hint.

Border width:  At higher values this setting creates a kind of extruded Brush Falloff.  A square shape, for example, becomes a curved pyramid - a Circle becomes a curved and tapering cylinder.

Depth:  Defines that depth that controls all effects.

Ignore back faces:  Allows the selected tool to work only on visible surfaces.

Load shape:  Loads a pre-defined Curve shape from a file. Accepts Adobe Illustrator files. The imported curve is converted to a 3D-Coat spline, which you can manipulate in the standard ways.

 

1.3 “ E”パネルブラシ設定

3Dコートのブラシは、通常のマウスやグラフィックタブレットのように強化された動作で適用できます。 「E」パネルには、ブラシストロークの適用を制御するのに役立ついくつかのブラシモードがあります。スプラインやポリゴンベースのさまざまな描画モードもあります。最初の5つのアイコンは、タブレットまたはマウスの操作を制御するのに役立ちます。

彫刻しない場合は、これらのツールは2Dで機能し、領域と「マスク」または「フリーズ」領域(およびペイントルームのレリーフ)を定義します。彫刻ツールの中には、描画した図形を複製、切り取り、または何らかの形のブール関数を実行するための手段として使用するものがあります。

「E」パネルに表示されているすべての機能を左から右、上から下の順に調べてみましょう。

これらの最初の5つのアイコンは標準のブラシモードであり、それらを一つずつ試してみることで最もよく理解することができます。各アイコンの上にマウスを置くと、各モードの説明が表示されます(すべての3DCツールおよび機能の場合と同様に、「ヒント」と呼ばれます)。

間隔をあけてブラシ「描点」を適用する:現在のブラシは、「ブラシオプション」パネルにある「描点、ジッター、間隔」オプションに特に反応します。実験はこの動作を最もよく示しています。

接続線を引く:それだけで、「Esc」キーを押した後に新しい一連の線を引くことができます。

基本曲線を描く:編集不可能な一連の接続されたスプライン曲線を描きます。ブラシの幅と深さは、標準のマウスジェスチャーでフライ上で制御できます。

包括的な曲線を描く:マウスを使って、ノードサイズと深さに関して完全に編集可能なスプラインまたはBスプラインの開または閉曲線を描きます。通常のマウスジェスチャで各ノードを「オンザフライ」で調整するか、「Esc」キーを押してノード「radius」が光るまでノードの上に移動し、半径と深さの両方をサイズ変更してから左クリックして確認します。 [Enter]を押して、ブラシとその設定をモデルに適用します。

曲線ファイルの保存や読み込みなど、このツールに関連するすべての機能にアクセスするには、ドロップダウン矢印を使用します。

スタンプツール:選択したブラシアルファを使用して、このアルファに基づいてマウスを左クリックした場所に、印象またはくぼみ、マスク、またはフリーズ領域を追加します。マウスを左クリックしてドラッグすると、スタンプのサイズが変更されて回転します。

移動可能なスタンプ:通常のスタンプツールと同様に機能しますが、マウスで左ドラッグすると、ブラシイメージ(アルファ)を​​モデルの表面に沿ってスライドさせることができます。

スクエアツール:スクロールホイールを使ってブラシのサイズを変更します。定義した正方形(または台形)の始点と終点に基づいて、3DCは[ブラシ]の[奥行き]設定に基づいて立方体または台形のソリッド形状を押し出しまたはインデントします。 (このブラシでは正射投影ビューを使用するのが最善です)。より高いボクセル解像度はより鋭くそしてよりきれいな形状を可能にする。

長方形ツール:正方形ツールと同じですが、長い長方形と長い台形の立体的な押し出し、インデント、およびマスクを使用できます。より高いボクセル解像度はより鋭くそしてよりきれいな形状を可能にする。

多角形スプラインツール:描画した2D多角形に基づいて、3DCはオブジェクトの表面法線に沿って領域を押し出し、インデント、マスクまたはフリーズします。小さな緑色の円が表示されるまで、シリーズの最初のポイントにカーソルを合わせます。次に、Enterキーを押して形状を確認します。
より高いボクセル解像度はより鋭くそしてよりきれいな形状を可能にする。

フリーフォーム描画ツール:マウスを使ってフリーフォーム図形を描き、最初の描画点の上に小さな緑色の円が表示されるまでブラシカーソルを移動します - 「Enter」を押して図形を確定します。 3DCは、[ブラシ]の[奥行き]設定に基づいて、オブジェクトの法線方向に沿って領域を押し出し、インデント、マスク、またはフリーズします。 より高いボクセル解像度はより鋭くそしてよりきれいな形状を可能にする。

円ツール:円の中心から端まで真円を描き、ブラシの深さ設定に基づいて、オブジェクトの法線に沿って円形を押し出し、インデント、マスク、またはフリーズします。

楕円ツール:押し出された形状が描かれた楕円に基づいている点を除けば、円ツールと同じです。

クローズドスプラインツール:エリアを閉じた正則スプラインまたはBスプライン形状として押し出し、インデント、マスク、またはフリーズします。

描画されたスプラインに付随するドロップダウン矢印の下に豊富なコマンドメニューがあります。 正則またはBスプラインを描き、「Esc」キーを押して図形を閉じます。 滑らかな補間または角度から変更するには、任意の点を右クリックします。 定義した形状を読み込んで保存することができます。 ヒントを表示するには、任意のコマンドの上にマウスを置きます。

境界線の幅:この値を大きくすると、押し出されたブラシFalloの種類が作成されます。 たとえば、正方形は湾曲したピラミッドになります。円は湾曲した先細の円柱になります。

深さ:すべての効果を制御する深さを定義します。

背面を無視:選択したツールが表示されているサーフェス上でのみ機能するようにします。

シェイプをロード:ファイルから定義済みのカーブシェイプをロードします。 Adobe Illustratorファイルを受け入れます。 インポートされた曲線は3Dコートスプラインに変換されます。このスプラインは標準的な方法で操作できます。